bonding evaluation

How does the chemical bonding reacts on components when it interfaces with different solvents. Perform Analysis on bonding solvents with mixture of cyclohexanone (CHX) and Methylene Ethyl ketone (MEK) when interfacing bonds with ABS, PVC, PP, Teralux, Cryolite produced components. Please include graphs with different percentage of solvent mixture like 50% of CHX and 50% MEK, 70% CHX and 30% MEK, 100% CHX, 100% MEK on interface bonding’s. please provide conclusion which is the good bonding mixture percentage. What happens when Cyclo and MEK meet with below listed component materials.
2. PVC-Acrylic
3. Acrylic-MABS
4. MABS-MABS
5. MABS-PVC
6. PVC-PVC
7. PC-PVC
8.PC-MABS

report about Engineering Mechanics-Dynamics

4-12 page review of concepts No Plagiarism at all. I will provide more information about which topics and providing the book…Each topic DOES NOT need its’ own section. For example, it may be easiest to talk about curvilinear motion in one section, or you may find it easier to separate curvilinear motion into two sections.The paper should be single-spaced, size 12 font, Times New Roman. You do not need to have a specific format for your reference section (if you use one), but you should include one if you are using outside references besides the class book.
Additionally, 1 example problem from the topics above should be included in the paper and explained in detail (Like we have been doing for the HW and Lecture Activities)! That is 1 example problem in total!

Calculate the frequency response of your BPF by hand (show calculation)

2 the matlab part. Calculate the frequency response of your BPF by hand (show calculation) and plot the magnitude
and phase frequency response with MATLAB. Use units of dB for the gain (magnitude frequency
response), and let the horizontal axis be frequency in Hz plotted on a log axis (i.e., use
semilogx(.)). Using the equation editor in Word, include a few steps and the final result of your
frequency response analysis in your report. What is the theoretical attenuation in dB at the
carrier? What is the theoretical attenuation in dB 10kHz from the carrier?
note: the lab is uploaded if you need it

Adding a Budget, ( My project plan is Building a Digital Voltmeter using ICL7107 )

Adding a Budget1.Cost Estimation Techniques
a.Identify three different cost estimation techniques. Write at least one paragraph for each cost estimation technique describing the technique and its advantages or disadvantages. Be sure to have in-text citations.
b.Then describe what technique or techniques you used for cost estimation for the various cost categories of your project. Be specific. Explain and demonstrate (through calculations as appropriate) in detail how you arrived at your various costs, especially for labor and parts. For instance, where did you obtain your rates for labor? Be sure to do in-text citation. Where did you get parts costs (expert estimate based on experience, specific websites – use in-text citations to reference them, average cost from several websites – use in-text citations to reference them, etc)?
c.Create a word document with all of the above. Be sure to have a reference page to all the references made in your in-text citations. Also provide a title page.
( My project plan is ” Building a Digital Voltmeter using ICL7107 ” )
https://www.electronicshub.org/digital-voltmeter-using-8051-microcontroller/

Adding a Budget

Adding a Budget1.Cost Estimation Techniques
a.Identify three different cost estimation techniques. Write at least one paragraph for each cost estimation technique describing the technique and its advantages or disadvantages. Be sure to have in-text citations.
b.Then describe what technique or techniques you used for cost estimation for the various cost categories of your project. Be specific. Explain and demonstrate (through calculations as appropriate) in detail how you arrived at your various costs, especially for labor and parts. For instance, where did you obtain your rates for labor? Be sure to do in-text citation. Where did you get parts costs (expert estimate based on experience, specific websites – use in-text citations to reference them, average cost from several websites – use in-text citations to reference them, etc)?
c.Create a word document with all of the above. Be sure to have a reference page to all the references made in your in-text citations. Also provide a title page.
2.Create Budget in Microsoft Project
a.Watch videos: Linked Tasks, Setting Up Resources, Assigning Resources and Assigning Resources, Constraints, and Deadlines
b.Using Microsoft Project software, amend your WBS to include your project budget.
Make sure that you use your resource sheet in Microsoft Project to list all materials, work classification units, and resource units.
Make sure you show totals for all major headings and the project total itself.

Adding a Budget

Adding a Budget1.Cost Estimation Techniques
a.Identify three different cost estimation techniques. Write at least one paragraph for each cost estimation technique describing the technique and its advantages or disadvantages. Be sure to have in-text citations.
b.Then describe what technique or techniques you used for cost estimation for the various cost categories of your project. Be specific. Explain and demonstrate (through calculations as appropriate) in detail how you arrived at your various costs, especially for labor and parts. For instance, where did you obtain your rates for labor? Be sure to do in-text citation. Where did you get parts costs (expert estimate based on experience, specific websites – use in-text citations to reference them, average cost from several websites – use in-text citations to reference them, etc)?
c.Create a word document with all of the above. Be sure to have a reference page to all the references made in your in-text citations. Also provide a title page.
2.Create Budget in Microsoft Project
a.Watch videos: Linked Tasks, Setting Up Resources, Assigning Resources and Assigning Resources, Constraints, and Deadlines
b.Using Microsoft Project software, amend your WBS to include your project budget.
Make sure that you use your resource sheet in Microsoft Project to list all materials, work classification units, and resource units.
Make sure you show totals for all major headings and the project total itself.

follow APA Format and instructions peer reviewed references and citations-dd

Review the attached file. Suzie has an issue. She can either move to NY or FL and needs to review some data that her agent gave her. The agent reviewed house prices and crime ratings for houses that Suzie would be interested in based on her selection criteria. She wants to live in an area with lower crime but wants to know a few things:
Is it more expensive or less expensive to live in FL or NY?
Is the crime rate higher in FL or NY (Note a low score in crime means lower crime)?
Is the crime rate higher in lower or higher house price areas?
Using the R tool, show the data in the tool to answer each of the questions. Also, show the data visualization to go along with the summary.
If you were Suzie, where would you move based on the questions above?
After you gave Suzie the answer above (to #4), she gave you some additional information that you need to consider: She has $100,000 to put down for the house.
If she moves to NY she will have a job earning $120,000 per year.
If she moves to FL she will have a job earning $75,000 per year.
She wants to know the following: On average what location will she be able to pay off her house first based on average housing prices and income she will receive?
Where should she move and why? Please show graphics and thoroughly explain your answer here based on the new information provided above.

Note: The screenshots should be copied and pasted and must be legible. Only upload the word document. Be sure to answer all of the questions above and number the answers. Be sure to also explain the rational for each answer and also ensure that there are visuals for each question above. Use two peer reviewed articles to support your position

Revise Group Project and presentation

Hi, I hope you’re doing well. I have a project we strive for security and made a presentation with a report for it. We are addressing our group project that is deleting personal info on the internet. and now I have to fix some parts by following the comments in the project file called”We strive for security”. I have uploaded all the requirements for it and if you have any questions please let me know. Also, I need a PowerPoint presentation and the requirement for it are attached below.

ENGI 2304 – Annotated Bibliography

Topic: HYDROGEN VEHICLES VS ELECTRIC VEHICLES (my major: Electrical Engineering)
I need 10 cited sources and 3 details for each source:
a. Reference follows your major for each source.
b. Database from the library for each source.
c. 2 sentences (how you think you may use the data from this source) for each source.

A.C Bridges

The four arms of a Hay’s a.c. bridge are arranged as follows: AB is a coil of unknown impedance; BC is a non-reactive resistor of 1000 Ω ; CD is a non-reactive resistor of 833 Ω in series with a standard capacitor of 0.38 μF ; DA is a non-reactive resistor of 16,800 Ω . If the supply frequency is 50 Hz, determine the inductance and the resistance at the balance condition