General Autocad

Submit each problem
as a separate file. This assignment consists of both hand drawings and an AutoCAD drawing. All holes are
through holes.
Hand-drawings: Draw neatly with a ruler. Do not draw in AutoCAD. You may use the paper provided
below or your own graph paper.

1. Draw the three orthogonal views of the object in Figure 1 by hand.
(Filename format: YourLastName_HW2_P1)

2. Draw the three orthogonal views of the object in Figure 2 by hand.
(Filename format: YourLastName_HW2_P2)

3. Draw the isometric view of the object in Figure 3 by hand.
(Filename format: YourLastName_HW2_P3)

4. Draw the isometric view of the object in Figure 4 by hand.
(Filename format: YourLastName_HW2_P4)
AutoCAD drawing: Use the same layers used in the Layers tutorial (p. 3-14), include an appropriately
filled out title block, and show dimensions. Do not hand-draw. Submit the .dwg drawing file.
5. Draw the three orthogonal views of the object shown in Figure 5 in AutoCAD. Do not draw the
actual 3D object. Dimensions are in [mm]. (Filename format: YourLastName_HW2_P5)